- Pump Action
- Brass inserted into the breech
- Spring Addition, Catch Spring Addition
- Teflon Tape under the O-ring
Oh, and don't forget the sick paint job.
Close up of the dragon design
If you can see, there is a dark circle in the breech. That is about 1/2" of 17/32" brass pushed into the breech. This makes for a tighter fit on the darts which is ideal for springer blasters.
I did the pump action on my Longshot a bit differently. I do believe that nobody else has done it this way. First I integrated the front gun, then extended the draw of it. I then used two screws (that didn't have a point at the end of them) and attached a wooden arm that I made to the pump slide:
The springs I added was just a Big Bad Bow spring, but the Longshot spring was an older, silver one; which is more powerful than the new black ones. Ranges of the Longshot are 65-75' Flat using converted streamlines. Not bad if I do say so myself. I might be doing an angel breech for this in the future.