How to: Mod Your Nano Jolt's Trigger - My Way!

So revisionfive/iamthatcat asked me to do an exploded view of my Nano Jolt's trigger.  You ask, and you shall receive!  Hopefully this post explains clearly how I do mine:

Pic of trigger spring

How I did mine was really simple.

Step 1: Find spring.  

Step 2: Wedge spring under trigger.  

Step 3:  You are done!

Better pic

I did this originally as a temporary hold until I found an adequate piece of plastic, however it hasn't had any flaws yet!

This method is also MUCH easier than finding and cutting a plastic rest.

Exploded view: trigger, pin, and spring

Spring close up

The spring I used was from a longer spring.  I just cut a small segment off, and used that.  It doesn't have to be extraordinarily strong, because mine isn't.

(Sorry for the bad lighting in the last two pics.)

Here's a vid that will hopefully explain all of this:

Hopefully, I explained this so that it can be replicated.  Its so simple, I'm not sure how one would be unable to understand!