This is the finished Battlemax Sceptor. It was quite an easy mod, which yields great performance. The mods done were 1/2 Pvc couplering, minimization, and pump handle replacement.
In most Sceptors I've seen, people like to use pvc wyes for the pump handles. I didn't use a wye because of thee reasons. 1: I don't have one, 2: I think it looks ugly, and 3: its a waste of a good wye. So, I used the original pump handle. I just cut it down, and glued it on with hot glue. I think this looks much better, feels much better, and is much easier to obtain than a wye.
I followed andtheherois's write-up on Nerfhaven when I modded my Sceptor. In his writeup, he used a 1-1/4" to 1/2" reducing bushing for the coupler.
I plan to eventually use a hopper on this blaster, but until then I'm going to use the cpvc breech I made.
Overall, this is a great blaster to mod. Its relatively cheap, pretty easy to mod, and fires great. You can't really go wrong with this one.
And as always, a firing demo:
Nice, and what are the ranges like o_0
ReplyDeleteWatch the video and skip to 1:29
DeleteI was joking.....
DeleteSure... ;)
Delete