Showing posts with label Homemade. Show all posts
Showing posts with label Homemade. Show all posts

Sunday, August 26, 2012

Long Overdue Snapbow Post

  Sorry for the lack of posts, but school has been taking up quite a bit of my time lately.

  This is a pretty standard snapbow. Verticle foregrip and stock addition makes this a comfortable blaster. It gets about 110' with my blue tip slugs and a single 10'' cpvc barrel.
 
   Everything is mechanically fastened with the exception of the trigger and foregrip piece superglued and hotglued onto the main plunger tube. It achieves 7'' of draw the a k26.

   A few things need to be fixed though. It needs a hopper. The handle is falling apart so I probably have to fix that.

       -soloz1

Friday, July 27, 2012

MOAR Mod Party Fun!

Soloz1 Pause and I had another mod party. We didn't accomplish much this time, but it was still fun nonetheless!

We made another Big Blast a video, just for your entertainment too!  Check it out:

Sunday, July 15, 2012

MIG Style Stefans!

I saw a post by Makeitgo awhile back on NerfRevolution on how he makes his darts.  Apparently, the way he made them, they got much better ranges than the normal stefan.
MIG stefans
So I decided to give it a try, and wow.  These darts are amazing!  I saw an immediate 10 foot increase out of all of my blasters, just by using these darts.

Supa domey
One reason why these darts work so well, is because they are very domey.  By following his instructions in his writeup,  I made almost perfect domes on every single dart that I made.

Strawz: dey help yo.
Because he uses stock dart foam for his darts, they have that hole in the middle.  That hole is one of the big reasons why they get much more range.  That hole allows for more air to be pocketed behind the dart in the barrel, before it is pushed forward, therefore increasing range.  The straw insert helps with the rigidity of the foam, so it doesn't squish down in the barrel from the air pressure.
Make some now.
Overall, if you want to use the true potential of your blasters use these darts.  However, they are slightly more expensive, take more time to make, and are more difficult to make than regular stefans.  Personally, I will be trying to make and use this type of dart more often.

Thanks Makeitgo!

Link to his write-up, here.

Saturday, July 14, 2012

Cpvc Breech!

Just a pretty basic Cpvc breech.  It didn't take long to make.  Its made from a Nerf Hornet pump tube, and cpvc (obviously) and fits into any 1/2 pvc couplered blaster.


Supa 1337
The Hornet pump tube nests over cpvc fairly snugly, and creates a good, but not perfect seal.  It all depends on the batch of cpvc though, as some batches are a bit "fatter" than others.

Open breech
The slot I cut for it is long enough to accept streamlines and stefans.

Streamline
Stefan
A very simple and basic breech.  It shouldn't be hard to replicate if you wish to do so.

And finally, for your viewing pleasure, a demonstration video:


Friday, June 1, 2012

A Superlative LS Plunger Head!

Ah, it feels great to post a modification again...  Or a homemade rather.  
Actually, its kind of both.  A "homemadificaiton" as Ice would say.

Cue the back story.

I was sitting in my chair, thinking about my Longshot, and how I could improve the seal.  I happened to glance over at my desk and saw the Superlative plunger head that I made for my failed Snapbow, and remembered how people were using Superlative plunger heads in Snap Carbines, that have similar plunger tube dimensions as Longshots.


I had one of them "light bulb" moments, and got working.  Within a few minutes, I managed to fit the Superlative plungerhead on to the Longshot's plunger rod.  It fit perfectly, and sealed wondrously.  So I re-assembled my Longshot and tested it out.  Sure enough, it gave me a 100% seal.


If you want to replicate this, the key to getting it to work is matching the thickness of the stock plunger head.  If your homemade plunger head isn't as thick as the stock one, the blaster won't be able to catch.

Mine is a little to short, and the catch slips sometimes.  Its an easy fix though.


Watch the video below for a comparison of the two plunger heads, and a seal test:


Just another simple but effective mod for your Longshot!  I suggest everyone try it.

Sunday, April 22, 2012

How To Make A HAMP

Just wanted to give you guys a video on how to make a HAMP.
High, Air pressure, Manual, Pump.

By the way I forgot to tell you in the video. That at the end of the plunger rod you have to glue a cardboard circle that will match the size if the hole. It is used to block air from coming out of the plunger rod.
It should look like this.
I also added electrical tape around it.

Thursday, April 5, 2012

RSCB Window Endcaps!

For those who don't know, Pacific Nerf is having a giveaway!
Click the link for more info: Link

I want to thank all who have followed.  In the past day, Pacific Nerf has gone from 18 followers, to 31 32 followers!  Over halfway there guys!  Keep spreading the word!  Remember, we have to get 50 followers before the end of April, in order to do the Giveaway!

------------------------------------------------------------------

Now, on to the main attraction:

While I was prepping my 4B for our war that never happened, I had an idea.  If I could put a window in my endcap, I could gauge how much darts I had left!

My Rev.1 was drilling a hole in an endcap, then glueing plastic on the inside of it, but it leaked too much.  My Rev.2 was much more easy and successful:



It is half of a PVC coupler with a clear plastic glued over it.  Much more easy and simple than drilling a hole in a Pvc endcap.  

When you look through the window, you can see how much darts you have left:





And when you are out of darts, you will be able to see light shining from out of your barrel:


I suggest everyone give this a go.  They are pretty handy in a war!  This setup is obviously most affective with an Rscb clip system.
This is a fairly good replacement for clear pvc, however clear pvc is still much better to use.
Hopefully someone can improve upon this simple trick!

Thanks for reading guys and remember to keep spreading the word about the Giveaway!

Monday, April 2, 2012

Review: Soloz1's Slug-style Stefans

Soloz1 and I made a trade, and in that trade, I got some of his darts!


They are slug-style stefans weighted with number 6 washers with blue felt tips and red foam.  I really love the red and blue.

Soloz1 used a blue sharpie and rubbing alcohol to dye the felt blue.  He also got the red foam from Modman, but it was his last batch.  



Very good quality foam, awesome colors, excellently made.  This really makes me want to buy some Mha foam for my darts, but until then, I'll just use his. :)


Saturday, February 4, 2012

Contracts Page + Mav/Titan Update

I made a contracts page for those of you who are interested in contracts from me.
If you are interested in a contract, please read the whole page before emailing.

On another note, I wanted to know if there would be any interest in my Mav/Titan if I were to sell it. 
Drop a comment below if you think I should! :)

Wednesday, January 25, 2012

Homemade: Snap Carbine!

I LOVE HOMEMADES :D

 This is my homemade, Snap Carbine.  This Snap variant was originally created by a Youtuber by the name of KNDoperative or A.C.E, as he goes on the forums.  It was then improved upon by Andtheherois.  If you want to make this homemade (which I highly suggest doing) follow this writeup.  Also, I apologize for weird pics.  The lighting was bad when I took them and so I had to edit them

Tuesday, November 8, 2011

Inline Clip Idea!

So I was sitting at my desk and I looked at an inline clip that I had laying around, and a wye.
*Lightbulb*
I came up with this:
So the drawback (in my opinion) for the inline clip system, is the slow reload.  Basicly, adding the wye to the back-end of the clip should (hopefully) increase the ROF.  To work it, you take the end cap off of the top part of the wye, feed darts in, the put the cap back on.  Let me point out that this is just an idea, and I don't know how good this would work in a war.